All Categories & Products
Thermal Spray Gun
The thermal spray gun manufacturer is used for coating purposes in this technology thickness of 22 microns to several mm thick coating is sprinkle and it depends on feedstock.
| Air Pressure | 70-100 psi |
| Nozzle Size | 3.15 mm |
| Form | Wire |
| Item Weight | 15 kg |
| Air Consumption | 8-9 cfm |
| Air Inlet | 3/8" |
| Sound Pressure | 115 dB |
| Usage/Application | Flame |
- During construction projects, shot blasting is also used to clean the outer walls, roads, and floors.
- Shot blasting is often used to clean tanks and pipes underwater before coating or recoating them to stop corrosion.
- ShipYard and ShipBuilding.
- aircraft maintenance and aerospace.
- Foundry for iron, steel, and other metals.
- The casting of aluminum.
- Forgings.
- Rail.
- Foundries.
- fabrication of steel.
- Car and bus murals.
- Wheel cleaning for alloys.
Thermal Spray Gun is utilized for covering measures in which dissolved materials are sprayed on a superficial level to give better cleaning and eliminate unfamiliar particles. Thermal spray guns give thick coatings up to a few mm relying upon the application. Covering materials accessible for thermal spraying incorporate metals, amalgams, earthenware production, plastics, and composites. The coal thermal spray guns are utilized for covering measures in which softened materials are sprayed on a superficial level to give better cleaning and eliminate unfamiliar particles.
Thermal Spray Gun Working
The thermal spray gun is utilized to improve the metal surface. The primary motivation behind utilizing a thermal spray gun manufacturer is the development of the turning shaft and expanding the life of machines.
The thermal spraying strategy can concoct thick covering over a huge territory at a high deceleration rate when contrasted with all the more covering measures. The thermal spray gun manufacturer softens the material which brings about liquid beads quickened in a gas stream that is projected against the surface to be covered. Liquid material causes in holding fast to the particles, covering, and interlocking.
Types of Thermal Spray Gun
Flame Spray Gun - Flame Spray Gun is used for the coating process. In this process, the raw material is in the form of a single wire, cord, & powder. It is used in various kinds of industries like automobile and mechanical utilities.
Wire Flame Spray Gun - Wire Flame Spray Gun is a thermal spraying process that uses an oxy-fuel gas flame as a source of heat for melting the coating substance.
High-Velocity Oxy-Fuel Spray - High-Velocity Oxy-Fuel Spray Gun is utilized for treating a lot harder, more wear, and destructive surface. A combination of fluid fuel and oxygen is taken care of into a burning chamber, where they are lighted persistently.
Arc Spray Gun - An arc spray gun may be a different sort of arc which deposits a coating on the inside and external surface of a part of any geometry. It’s mostly used for coating on the cylinder bores of an engine.
Plasma Fire Spray Gun - Plasma Fire Spray Gun is utilized for both huge surfaces just as little inward bore widths surface coatings. Plasma Spray measure incorporates the spraying of liquid or warm mollified materials onto a surface to give a covering.
Features of Thermal Spray Gun
- Increase the life of machines
- Provide excellent finish
- Resist corrosion
- Reliable and efficient
- Economic and long-lasting
- High Performance
Thermal Spray Gun Manufacturer in India
Blast Rooms is the best-designed model for Thermal Spray Gun Manufacturer in India as per their applications. The prices of Thermal Spray Gun are within the budget of the customers, they can afford them easily. From ordering to delivering, Blast rooms give assurance of providing the best service. The thermal spray guns available here are capable of working on any type of work-piece geometry.
For more Queries Email Us at - info@blastrooms.in